[Full Coverage Protection] Fit iPhone 11/XR 6.1-inch. Maximum cover the screen edge to edge and designed with a precise speaker cutout. Offer full screen protection while keeping front camera and sensor highly protective
[Effortless Installation] Comes with an easy installation tool. Allow you to align perfectly and install the screen protector quickly without leaving any air bubbles
[Premium Tempered Glass] Highly protect the screen against scratches and abrasions up to 9H (harder than a knife). Oleophobic coating keeps the screen free from fingerprints and oil
[Ultra Clear & Highly Sensitive] Ensure an enjoyable viewing experience as using your bare screen. Highly responsive to every touch and tap
[Case-Friendly] There is enough edge space around the borders for your case to wrap around the edges of your mobile. Compatible with most phone cases
414 reviews for JETech Full Coverage Screen Protector for iPhone 11/XR 6.1-Inch, Tempered Glass Film with Easy Installation Tool, Case-Friendly, HD Clear, 3-Pack
Rated 5 out of 5
Mac –
fits the phone everything’s cool
Rated 4 out of 5
KK –
Came on time. first install had too many particals from the sticky cleaner. The second was better just had to be very careful. Out come was good with one or two very tiny air bubbles. Used two protectors to get one to work.
Rated 5 out of 5
N.T –
Very good product and so easy to install on iPhone 11 and a very good price.
Rated 5 out of 5
Vee –
No issues. Second purchase the first one lasted a long time so they are good quality. And easy to put on.
Rated 5 out of 5
Pierre V. –
Very easy to install. Good quality glass! I will buy more!!! 🙂
Rated 5 out of 5
Evgeni Tzokota –
Thi is the best screen protector
Rated 4 out of 5
Lee T –
Easy to apply. Well packaged.
Rated 5 out of 5
Pen Name –
Really easy to use as it comes with a special case to help you get it on. I only ended up with one tiny bubble where I left a speck of dust.
Rated 5 out of 5
paul rossiter –
Quality product and exactly as described. Thanks.
Rated 5 out of 5
reviewers name –
Same quality as more expensive brands. I wondered if these would be the same quality as previous more expensive brandings so I took a chance for $8 bucks. Perfect! Same quality. Melted into place. Probably all made at same factory anyways. For three pieces this is a great value. I found touch screen just as responsive as before..Tips:.> Although they come with everything you need for a successful install. including a sticky sticker for picking up dust. I still keep some Scotch magic tape handy to pick up dust..> I lay a flashlight flat on table shining across screen to reveal any small specs of dust before I apply glass protector..> I start at the top edge and slowly lay protector down letting it do all the work..> It’s not unusual after all your careful prep that a spec or two gets trapped underneath glass – NO WORRIES – relax and just carefully pick up nearest corner edge (just the very edge do not wedge underneath the black boarder) of glass with finger nail etc. and it will start to slowly unseal. BUT don’t take it completely off – just lift enough to expose dust. Holding this position take their sticky sticker. or (my preference) Scotch magic tape. and determine if dust specs are adhering to phone glass or underside of screen protector glass. Then go after dust with sticky side of tape. You absolutely can stick your tape to the underside of the glass protector screen without affecting its ability to seal back to phone glass seamlessly – I’ve done this with both their sticky sticker and Scotch magic tape. This method works perfectly as long as you don’t let fingers touch and only use the tape. I have pressed a finger behind the tape to go after stubborn particulate with no issues. *(non adhesive side of any tape roll can be dusty so pull off one full revolution and discard first).
Contact Us
Mac –
fits the phone everything’s cool
KK –
Came on time. first install had too many particals from the sticky cleaner. The second was better just had to be very careful. Out come was good with one or two very tiny air bubbles. Used two protectors to get one to work.
N.T –
Very good product and so easy to install on iPhone 11 and a very good price.
Vee –
No issues. Second purchase the first one lasted a long time so they are good quality. And easy to put on.
Pierre V. –
Very easy to install. Good quality glass! I will buy more!!! 🙂
Evgeni Tzokota –
Thi is the best screen protector
Lee T –
Easy to apply. Well packaged.
Pen Name –
Really easy to use as it comes with a special case to help you get it on. I only ended up with one tiny bubble where I left a speck of dust.
paul rossiter –
Quality product and exactly as described. Thanks.
reviewers name –
Same quality as more expensive brands. I wondered if these would be the same quality as previous more expensive brandings so I took a chance for $8 bucks. Perfect! Same quality. Melted into place. Probably all made at same factory anyways. For three pieces this is a great value. I found touch screen just as responsive as before..Tips:.> Although they come with everything you need for a successful install. including a sticky sticker for picking up dust. I still keep some Scotch magic tape handy to pick up dust..> I lay a flashlight flat on table shining across screen to reveal any small specs of dust before I apply glass protector..> I start at the top edge and slowly lay protector down letting it do all the work..> It’s not unusual after all your careful prep that a spec or two gets trapped underneath glass – NO WORRIES – relax and just carefully pick up nearest corner edge (just the very edge do not wedge underneath the black boarder) of glass with finger nail etc. and it will start to slowly unseal. BUT don’t take it completely off – just lift enough to expose dust. Holding this position take their sticky sticker. or (my preference) Scotch magic tape. and determine if dust specs are adhering to phone glass or underside of screen protector glass. Then go after dust with sticky side of tape. You absolutely can stick your tape to the underside of the glass protector screen without affecting its ability to seal back to phone glass seamlessly – I’ve done this with both their sticky sticker and Scotch magic tape. This method works perfectly as long as you don’t let fingers touch and only use the tape. I have pressed a finger behind the tape to go after stubborn particulate with no issues. *(non adhesive side of any tape roll can be dusty so pull off one full revolution and discard first).