JETech One Touch Screen Protector for iPad Pro 12.9-Inch (2022/2021/2020/2018 Model, 6th/5th/4th/3rd Generation), Tempered Glass Film with Auto-Alignment Frame, HD Clear
JETech One Touch Screen Protector for iPad Pro 12.9-Inch (2022/2021/2020/2018 Model, 6th/5th/4th/3rd Generation), Tempered Glass Film with Auto-Alignment Frame, HD Clear
[One Touch Installation] The included auto alignment tool makes installation a breeze. Quick to align and install in a few seconds without bubbles. Note: The screen protector is pre-set on the alignment tray
[Compatibility] Exclusively fit iPad Pro 12.9-Inch 2022/2021/2020/2018 (6th/5th/4th/3rd Generation). Fit Models: A2378/A2379/A2461/A2462/A2069/A2229/A2232/A2233/A1876/A1895/A1983/A2014/A2436/A2764/A2437/A2766. Please check back bottom of your iPad to find the model number
[Anti-Scratch] Built with 9H extremely high hardness tempered glass. Effectively withstand impacts from heavy scratches and abrasions
[Crystal Clear] 99.9% Light transmittance preserves the original screen brightness. Special oleophobic screen coating keeps fingerprints and oil away. Always provide a clear and clean screen environment
[High Sensitivity] Only 0.33 mm thickness glass. Allow an accurate and quick response on the screen
16 reviews for JETech One Touch Screen Protector for iPad Pro 12.9-Inch (2022/2021/2020/2018 Model, 6th/5th/4th/3rd Generation), Tempered Glass Film with Auto-Alignment Frame, HD Clear
Rated 5 out of 5
Knut Norgaard-Graversen –
It only took a couple minutes to install. The bubble removal tool made it easy to have a perfect clear screen. I would buy again
Rated 4 out of 5
JRF –
Overall this is a good product that works well. However. I did not find fitting very easy compared to fitting the equivalent item for my 11 inch iPad Pro a couple of years ago. I was successful in the end. though..Here are some tips I found useful. listed in the order they were employed..- I discarded the frame after attempts to use it did not lead to the screen protector going on straight. With careful effort. I was eventually able to align the protector properly. There should be about 0.5mm of the iPad’s screen left clear around each edge when the alignment is correct..- Holding the corner of the protector firmly in place with a thumb. I very slowly lowered it to let it cover the screen as gradually as possible..- I found that the key point is to prevent bubbles forming in the first place. rather than trying to eliminate them later. The latter is difficult to do completely. If one formed. I slightly lifted the protector until it disappeared. and then pressed firmly when re-attaching the protector to the area where the bubble had been..- If after you have let the whole protector drop into place and still see bubbles (or dust). I found a way to lift it free without damage is very gently. using a fingernail. by the notch cutout rather than a corner. The nearly 90o angle of the notch helps get a grip here..Once fitted properly. this screen protector becomes almost unnoticeable. and does not impede use of the iPad at all.
Rated 5 out of 5
Darryl –
Great and easy to fit screen protectors. pay more. but no wasted poorly placed screen protectors
Rated 5 out of 5
Darcy –
Overall good and would buy again
Rated 5 out of 5
Education Consultant –
First class product. easy to use. very pleased with final finish.
Rated 5 out of 5
MR EDDIE RAYNER –
Just remember to not wear sleeves to reduce dust particles. otherwise excellent alignment for use with cases.
Rated 5 out of 5
L. Dunne –
This item was extremely easy to install with the enclosed installation tools. Works great on my iPad Pro.
Rated 5 out of 5
Paul B. –
This is a great product and someone has thought about everything. Supplied in the box is a frame with glass attached with a sticker. There is a glass cleaning wipe and cloth to clean the screen. Also supplied is a smoothing tool to take out any bubbles and a sticky pad to remove any dust spots. The protective glass once installed is perfect. You just place the frame over the iPad. remove holding sticker and glass drops in place. I had 2 small air bubbles which the smoothing tool took out no problem. Would highly recommended this product.
Contact Us
Knut Norgaard-Graversen –
It only took a couple minutes to install. The bubble removal tool made it easy to have a perfect clear screen. I would buy again
JRF –
Overall this is a good product that works well. However. I did not find fitting very easy compared to fitting the equivalent item for my 11 inch iPad Pro a couple of years ago. I was successful in the end. though..Here are some tips I found useful. listed in the order they were employed..- I discarded the frame after attempts to use it did not lead to the screen protector going on straight. With careful effort. I was eventually able to align the protector properly. There should be about 0.5mm of the iPad’s screen left clear around each edge when the alignment is correct..- Holding the corner of the protector firmly in place with a thumb. I very slowly lowered it to let it cover the screen as gradually as possible..- I found that the key point is to prevent bubbles forming in the first place. rather than trying to eliminate them later. The latter is difficult to do completely. If one formed. I slightly lifted the protector until it disappeared. and then pressed firmly when re-attaching the protector to the area where the bubble had been..- If after you have let the whole protector drop into place and still see bubbles (or dust). I found a way to lift it free without damage is very gently. using a fingernail. by the notch cutout rather than a corner. The nearly 90o angle of the notch helps get a grip here..Once fitted properly. this screen protector becomes almost unnoticeable. and does not impede use of the iPad at all.
Darryl –
Great and easy to fit screen protectors. pay more. but no wasted poorly placed screen protectors
Darcy –
Overall good and would buy again
Education Consultant –
First class product. easy to use. very pleased with final finish.
MR EDDIE RAYNER –
Just remember to not wear sleeves to reduce dust particles. otherwise excellent alignment for use with cases.
L. Dunne –
This item was extremely easy to install with the enclosed installation tools. Works great on my iPad Pro.
Paul B. –
This is a great product and someone has thought about everything. Supplied in the box is a frame with glass attached with a sticker. There is a glass cleaning wipe and cloth to clean the screen. Also supplied is a smoothing tool to take out any bubbles and a sticky pad to remove any dust spots. The protective glass once installed is perfect. You just place the frame over the iPad. remove holding sticker and glass drops in place. I had 2 small air bubbles which the smoothing tool took out no problem. Would highly recommended this product.
Carlos M –
Really good quality to protect and use your ipad
Faye –
Loving the screen protector .